1 . We use adjustable wrench to all sizes of nuts. 2 . We use extension with ratchet to loosen or tighten nuts at places hard to reach. 3 . A rusty measuring tape need to be replaced. 4 . An electrician uses a side cutter to cut wires. 5 . Always use the right type of screwdriver to avoid damage to screw. 6 . Box spanner is a common tools used in car workshop. 7 . I need to buy a size 20 ring wrench. 8 . Long nose pliers are suitable to hold small object. 9 . Warrington hammer is used for small nails. 10. Allen key can only be used with Allen key screw.
Prepared by : KU MUHAMMAD ALIF BIN KU AZHAN MUHAMMAD KHAZAR BIN KUNDUR KISHAN A/L CHANDRAN
1.Ali went to buy a ratchet spanners for his dad. 2.Use vernier caliper to measure workpieces. 3.Adjustable spanner can be used for various sizes of nut. 4.There are various types of allen key. 5.I want to buy a new torchlight. 6.Use screwdriver to tightens the screw properly. 7.I have a line of spanners. 8.The measuring tape's brand is Wilton. 9.Hammers are hand tools used to drive nails. 10.There is a box of screws in the tool box.
Muhammad Hafizuddin Bin Ahmad Khairan Roziah Binti Samsuri Ahmad Zufayri Bin Ahmad Yusof
1)My brother open the screw engine with a spanner. 2)A screw driver that is to small can slip and injure your hand. 3)In the dark place must use a touch light. 4)We use a measuring tape for stable the chair. 5)The safety helmet can help for a pliers falling any need. 6)Hammer a basic tools in any trades. 7)My mother cuts the carrot with a knife. 8)Pliers are a hand tools used to hold object firmly. 9)Long nose pliers use for hold something small. 10)Adjustable spanner use for a bigger screw.
JEGASUNDAR A/L JEGATHESAN MOHAMMAD SYAFIQ BIN SUPIAN
1.Mat use measuring tape to measure the door. 2.Wire cutter be used to cut wires. 3.My hand bruise because using hammer wrongly. 4.My brother's bought a new bunch of allen key. 5.I use torchlight went blackout. 6.Ali have a new Wilton jigsaw. 7.Mail tighter the screw properly by using screw driver. 8.Vernier Caliper can measure until 0.02mm. 9.Mr.Kamal has a line of spana in different sizes. 10.Wire stripping also can be use to cut wire.
Abdul Harith Bin Mohamad Ramli muhamad amirul rezza bin kudran syarifah rasyidah binti rosli
4 comments:
1 . We use adjustable wrench to all sizes of nuts.
2 . We use extension with ratchet to loosen or tighten nuts at places hard to reach.
3 . A rusty measuring tape need to be replaced.
4 . An electrician uses a side cutter to cut wires.
5 . Always use the right type of screwdriver to avoid damage to screw.
6 . Box spanner is a common tools used in car workshop.
7 . I need to buy a size 20 ring wrench.
8 . Long nose pliers are suitable to hold small object.
9 . Warrington hammer is used for small nails.
10. Allen key can only be used with Allen key screw.
Prepared by : KU MUHAMMAD ALIF BIN KU AZHAN
MUHAMMAD KHAZAR BIN KUNDUR
KISHAN A/L CHANDRAN
1.Ali went to buy a ratchet spanners for his dad.
2.Use vernier caliper to measure workpieces.
3.Adjustable spanner can be used for various sizes of nut.
4.There are various types of allen key.
5.I want to buy a new torchlight.
6.Use screwdriver to tightens the screw properly.
7.I have a line of spanners.
8.The measuring tape's brand is Wilton.
9.Hammers are hand tools used to drive nails.
10.There is a box of screws in the tool box.
Muhammad Hafizuddin Bin Ahmad Khairan
Roziah Binti Samsuri
Ahmad Zufayri Bin Ahmad Yusof
1)My brother open the screw engine with a spanner.
2)A screw driver that is to small can slip and injure your hand.
3)In the dark place must use a touch light.
4)We use a measuring tape for stable the chair.
5)The safety helmet can help for a pliers falling any need.
6)Hammer a basic tools in any trades.
7)My mother cuts the carrot with a knife.
8)Pliers are a hand tools used to hold object firmly.
9)Long nose pliers use for hold something small.
10)Adjustable spanner use for a bigger screw.
JEGASUNDAR A/L JEGATHESAN
MOHAMMAD SYAFIQ BIN SUPIAN
1.Mat use measuring tape to measure the door.
2.Wire cutter be used to cut wires.
3.My hand bruise because using hammer wrongly.
4.My brother's bought a new bunch of allen key.
5.I use torchlight went blackout.
6.Ali have a new Wilton jigsaw.
7.Mail tighter the screw properly by using screw driver.
8.Vernier Caliper can measure until 0.02mm.
9.Mr.Kamal has a line of spana in different sizes.
10.Wire stripping also can be use to cut wire.
Abdul Harith Bin Mohamad Ramli
muhamad amirul rezza bin kudran
syarifah rasyidah binti rosli
Post a Comment