1. The mould clamping cylinder is hard and silver coloured. 2. The tie bar is long and round shaped. 3. The moving platern is strong and sturdy. 4. The mould tool is hefty and durable. 5. The fixed platern is concentrated and stationary. 6. The barrel interior is big and spacious. 7. Fine and tiny plastic granules are the raw material. 8. The screw is nice and bulky. 9. The transparent hopper is designed to be able to see inside. 10. The great and huge drive unit is used to propel the screw. 11. The injection cylinder is solid and heavy. 12. Molten plastic is very hot and burning. 13. Check valve is circle shaped and waterproof. 14. The heater bands is heatproof and accurate.
By : KU MUHAMMAD ALIF BIN KU AZHAN AND ZHARFAN SYAH BIN ABDULL KHALIB
1. The molton plastic is red, big and triangle design 2. The check valve is blue and circle design 3. It is a strong and solid moving platern 4. The fixed platern is in a triangle and big design 5. It is a long and cooper tie bar 6. The mould tool is square and tight 7. It is a tiny and hard barrel 8. The screw is long, small and pyramid design 9. The plastic granules is volumetric curve and plastic design. 10. It is a aluminum and steel hopper 11. The drive unit is rectangle and silver design 12. The mould clamping cylinder is huge and tough design 13. It is a heavy and compact injection cylinder 14. The heater bands is a heatproof and accurate
1. The mould lamping cylinder is big , circle and heavy item . 2. they have long and black colour at the tie bar . 3. The moving platern are thick and compact to hold the mould . 4. The mould tool is silver , hot and sharp . 5. They have two shape fixed platern triangle and wide . 6. The barrel is wide , hard and circle design . 7. It is a big and sturdy screw toroll get the plastic shape . 8. The plastic granules is red colour and shaft pattern . 9. The hopper is yellow colour and round . 10. The drive unit is strong and big . 11. The injectin cylinder is round and compact . 12. The moltan plastic is long and thick plastic . 13. The heater bands is heating nad toothed . 14. The check valve round and cover the screw .
By : Mohamad Syafiq Bin Supian . : Muhammad Khazar Bin Kundur .
1. The Mould Tool is big, square.and clear design. 2. The Fixed Platern is shine,silver and thick. 3. The Barrel is long, cylinder and straight. 4. The Plastic Granules is luxurious, amazing and red colour. 5. The Screw is strong, hard and rough surface. 6. It is medium size , yellow colour and transparent Hopper. 7. The Drive Unit is solid , great surface and fine. 8. The Design check valve is bronze colour in made aluminum. 9. Mould Clamping Cylinder is silver and stainless stell. 10.The Molton Plastic is length and red colour. 11.The Tie Bar is black,long and sturdy. 12.The Heater Band is black , small, and circle. 13.Drive Unit is rectangle and silver. 14.The Injection Cylinder is round ,thick and strong.
BY = SYARIFAH RASYIDAH BINTI ROSLI. ROZIAH BINTI SAMSURI.
1.The molton plastic is big,red,triangle. 2.The check valve is blue and soft 3.The moving platern is hard,stainless and heavy. 4.The drive unit is sturdy and solid. 5.The injection cylinder noisy and made of iron. 6.The mould clamping cylinder is strong and compact. 7.The tie bar is long and neat. 8.The screw is circle and blunt. 9.The mould tool is stable and spacious. 10.The fixed platern is hot and square. 11.The barrel is large and made of aluminium. 12.The plastic granules is heat resisting and easy to shape. 13.The hopper is yellow and transparent. 14.The heater bands is round and made of copper.
# ABDUL HARITH BIN MOHAMAD RAMLI # MUHAMMAD HAFIZUDDIN BIN AHMAD KHAIRAN
1)Moving Platern and Fixed Platern is rectangle shape. 2)Mould Tool is a solid and precise part. 3)The Plastic Granules is a thin and tiny. 4)It is a blue and round shape Check Valve. 5)The Molton Plastic is a melted and hot. 6)There are four of the Heater Bands and square shape. 7)The Hopper is spacious and nice. 8)The Mould Clamping Cylinder is a sturdy and strong. 9)The Drive Unit is used to drive the Screw and the Drive Unit is huge. 10)The Injection Cylinder looks like dumbell and it is tidy. 11)The Barrel is curvy and clean. 12)It is a tiny, long and metal Tie Bar.
prepared by, AHMAD ZUFAYRI BIN AHMAD YUSOF MUHAMAD AMIRUL REZZA BIN KUDRAN.
1.The mould clamping cylinder is in cylinder shape,thin and made from steel. 2.The tie bar is long and not too thick. 3.The moving platern is rectangle in size and strong. 4.The mould tool is square in size and grey colour. 5.The fixed platern is red in colour and dense. 6.The molton plastic is dark pink in colour. 7.The check value is blue in colour and circle. 8.The heater bands is dark blue and small size. 9.The barrel is cone in size and silver colour. 10.The spiral,round and waterproof screw. 11.The plastic granules is a semicircle size and big. 12.The hopper is plastic and yellow in colour. 13.The drive units is argentum design and huge. 14.The injection cylinder is white in colour and spherical design.
Done By, JAWADUL SHAHRIL BIN JAMALUTHIN, KISHAN A/L CHANDRAN...
7 comments:
1. The mould clamping cylinder is hard and silver coloured.
2. The tie bar is long and round shaped.
3. The moving platern is strong and sturdy.
4. The mould tool is hefty and durable.
5. The fixed platern is concentrated and stationary.
6. The barrel interior is big and spacious.
7. Fine and tiny plastic granules are the raw material.
8. The screw is nice and bulky.
9. The transparent hopper is designed to be able to see inside.
10. The great and huge drive unit is used to propel the screw.
11. The injection cylinder is solid and heavy.
12. Molten plastic is very hot and burning.
13. Check valve is circle shaped and waterproof.
14. The heater bands is heatproof and accurate.
By : KU MUHAMMAD ALIF BIN KU AZHAN AND ZHARFAN SYAH BIN ABDULL KHALIB
1. The molton plastic is red, big and triangle design
2. The check valve is blue and circle design
3. It is a strong and solid moving platern
4. The fixed platern is in a triangle and big design
5. It is a long and cooper tie bar
6. The mould tool is square and tight
7. It is a tiny and hard barrel
8. The screw is long, small and pyramid design
9. The plastic granules is volumetric curve and plastic design.
10. It is a aluminum and steel hopper
11. The drive unit is rectangle and silver design
12. The mould clamping cylinder is huge and tough design
13. It is a heavy and compact injection cylinder
14. The heater bands is a heatproof and accurate
by: MUHAMMAD FIKRI AND JEGASUNDAR A/L JEGATHESAN
1. The mould lamping cylinder is big , circle and heavy item .
2. they have long and black colour at the tie bar .
3. The moving platern are thick and compact to hold the mould .
4. The mould tool is silver , hot and sharp .
5. They have two shape fixed platern triangle and wide .
6. The barrel is wide , hard and circle design .
7. It is a big and sturdy screw toroll get the plastic shape .
8. The plastic granules is red colour and shaft pattern .
9. The hopper is yellow colour and round .
10. The drive unit is strong and big .
11. The injectin cylinder is round and compact .
12. The moltan plastic is long and thick plastic .
13. The heater bands is heating nad toothed .
14. The check valve round and cover the screw .
By : Mohamad Syafiq Bin Supian .
: Muhammad Khazar Bin Kundur .
1. The Mould Tool is big, square.and clear design.
2. The Fixed Platern is shine,silver and thick.
3. The Barrel is long, cylinder and straight.
4. The Plastic Granules is luxurious, amazing and red colour.
5. The Screw is strong, hard and rough surface.
6. It is medium size , yellow colour and transparent Hopper.
7. The Drive Unit is solid , great surface and fine.
8. The Design check valve is bronze colour in made aluminum.
9. Mould Clamping Cylinder is silver and stainless stell.
10.The Molton Plastic is length and red colour.
11.The Tie Bar is black,long and sturdy.
12.The Heater Band is black , small, and circle.
13.Drive Unit is rectangle and silver.
14.The Injection Cylinder is round ,thick and strong.
BY = SYARIFAH RASYIDAH BINTI ROSLI.
ROZIAH BINTI SAMSURI.
1.The molton plastic is big,red,triangle.
2.The check valve is blue and soft
3.The moving platern is hard,stainless and heavy.
4.The drive unit is sturdy and solid.
5.The injection cylinder noisy and made of iron.
6.The mould clamping cylinder is strong and compact.
7.The tie bar is long and neat.
8.The screw is circle and blunt.
9.The mould tool is stable and spacious.
10.The fixed platern is hot and square.
11.The barrel is large and made of aluminium.
12.The plastic granules is heat resisting and easy to shape.
13.The hopper is yellow and transparent.
14.The heater bands is round and made of copper.
# ABDUL HARITH BIN MOHAMAD RAMLI
# MUHAMMAD HAFIZUDDIN BIN AHMAD KHAIRAN
1)Moving Platern and Fixed Platern is rectangle shape.
2)Mould Tool is a solid and precise part.
3)The Plastic Granules is a thin and tiny.
4)It is a blue and round shape Check Valve.
5)The Molton Plastic is a melted and hot.
6)There are four of the Heater Bands and square shape.
7)The Hopper is spacious and nice.
8)The Mould Clamping Cylinder is a sturdy and strong.
9)The Drive Unit is used to drive the Screw and the Drive Unit is huge.
10)The Injection Cylinder looks like dumbell and it is tidy.
11)The Barrel is curvy and clean.
12)It is a tiny, long and metal Tie Bar.
prepared by,
AHMAD ZUFAYRI BIN AHMAD YUSOF
MUHAMAD AMIRUL REZZA BIN KUDRAN.
1.The mould clamping cylinder is in cylinder shape,thin and made from steel.
2.The tie bar is long and not too thick.
3.The moving platern is rectangle in size and strong.
4.The mould tool is square in size and grey colour.
5.The fixed platern is red in colour and dense.
6.The molton plastic is dark pink in colour.
7.The check value is blue in colour and circle.
8.The heater bands is dark blue and small size.
9.The barrel is cone in size and silver colour.
10.The spiral,round and waterproof screw.
11.The plastic granules is a semicircle size and big.
12.The hopper is plastic and yellow in colour.
13.The drive units is argentum design and huge.
14.The injection cylinder is white in colour and spherical design.
Done By,
JAWADUL SHAHRIL BIN JAMALUTHIN,
KISHAN A/L CHANDRAN...
Post a Comment