1.It is waterproof hopper. 2.The colour of hopper is yellow. 3.The screw is made from steel. 4.There is one screw in the machine. 5.The plastic granules is a thin and tiny. 6.The plastic garnules is amazing. 7.The tie bar is long and round shaped. 8.It is a cooper tie bar. 9.The barrel are blunt. 10.The barrel is made of aluminium. 11.The mould tool are sharp and hot. 12.The mould tool is tight. 13.The injection cylinder is compact. 14.The injection cylinder is strong. 15.The drive unit is big. 16.The drive unit is rectangle. 17.The molton plastic is lenght. 18.The molton are melted. 19.The moving platern is sturdy. 20.The moving platern is heavy. Group members : 1.Muhammad Amirul Haziq bin Salihin 2.Hamizan Bin Ediy 3.Muhammad Adib bin Khairul Anuar 4.Muhammad Faiz bin Amir Nordin
1.The mould clamping cylinder's shape is circle and yellow in colour. 2.The moving platern is hard and it is in grey colour. 3.The barrel is in blue colour and makes the stuff tidy. 4.The screw is made out of steel and always busy. 5.There are 2 heater bands and they are strong because it conducts heat. 6.Plastic granules is orange colour and it made out of plastic 7.The hopper is in yellow colour and it is round in shape. 8.The drive unit is turdy and neat. 9.The injection cylinder is waterproof and very precise at its position. 10.The fixed platern's vertex is sharp and noisy when it was hit by something.
Prepared by: 1.Mikhail Bin Ali 2.Hazwan Suhandra Bin Abu Zarni 3.Nur Ahya Fahimah Binti Abdul Zabit 4.Muhammad Azri Bin Zulkifli
Colour 1.The structure of the machine is blue in colour. 2.The hopper is yellow in colour so it can easily be seen. 3.The plastic granules which is inside the hopper is red in colour. 4.The chain at the end of the machine is gold in colour.
Quantity 1.There are 4 heater bands beneath the barrel. 2.There are 2 types of platern which is fixed and moving platerns. 3.The screw has 9 external threads. 4.There are 1 mould tool on each of the machines.
Brand 1.The machine is made from Yamashito Company 2.The screw is made from Bosch. 3.The injection cylinder is use from Kyobo products. 4.The check valve is made from Hitachi Corporation.
Size 1.The screw is big in size and strong for a long lasting usage. 2.The small tie bar is used for to tighten the moving platern cylinder and the mould clamping cylinder. 3.The injection cylinder is medium size. 4.A bigger barrel is use for a bigger screw.
Quality 1.The machine is solid and sturdy. 2.The machine makes less noise. 3.The mould tool has precise measurement. 4.The chain is durable and can handle in any situations.
Prepared by, Muhammad Hafiz Bin Muhammad Zamri Muhammad Najibbuddin Bin Abu Zarni Nor Fitriyah Bt Nor Wahee ^_^
3 comments:
1.It is waterproof hopper.
2.The colour of hopper is yellow.
3.The screw is made from steel.
4.There is one screw in the machine.
5.The plastic granules is a thin and tiny.
6.The plastic garnules is amazing.
7.The tie bar is long and round shaped.
8.It is a cooper tie bar.
9.The barrel are blunt.
10.The barrel is made of aluminium.
11.The mould tool are sharp and hot.
12.The mould tool is tight.
13.The injection cylinder is compact.
14.The injection cylinder is strong.
15.The drive unit is big.
16.The drive unit is rectangle.
17.The molton plastic is lenght.
18.The molton are melted.
19.The moving platern is sturdy.
20.The moving platern is heavy.
Group members :
1.Muhammad Amirul Haziq bin Salihin
2.Hamizan Bin Ediy
3.Muhammad Adib bin Khairul Anuar
4.Muhammad Faiz bin Amir Nordin
1.The mould clamping cylinder's shape is circle and yellow in colour.
2.The moving platern is hard and it is in grey colour.
3.The barrel is in blue colour and makes the stuff tidy.
4.The screw is made out of steel and always busy.
5.There are 2 heater bands and they are strong because it conducts heat.
6.Plastic granules is orange colour and it made out of plastic
7.The hopper is in yellow colour and it is round in shape.
8.The drive unit is turdy and neat.
9.The injection cylinder is waterproof and very precise at its position.
10.The fixed platern's vertex is sharp and noisy when it was hit by something.
Prepared by:
1.Mikhail Bin Ali
2.Hazwan Suhandra Bin Abu Zarni
3.Nur Ahya Fahimah Binti Abdul Zabit
4.Muhammad Azri Bin Zulkifli
Colour
1.The structure of the machine is blue in colour.
2.The hopper is yellow in colour so it can easily be seen.
3.The plastic granules which is inside the hopper is red in colour.
4.The chain at the end of the machine is gold in colour.
Quantity
1.There are 4 heater bands beneath the barrel.
2.There are 2 types of platern which is fixed and moving platerns.
3.The screw has 9 external threads.
4.There are 1 mould tool on each of the machines.
Brand
1.The machine is made from Yamashito Company
2.The screw is made from Bosch.
3.The injection cylinder is use from Kyobo products.
4.The check valve is made from Hitachi Corporation.
Size
1.The screw is big in size and strong for a long lasting usage.
2.The small tie bar is used for to tighten the moving platern cylinder and the mould clamping cylinder.
3.The injection cylinder is medium size.
4.A bigger barrel is use for a bigger screw.
Quality
1.The machine is solid and sturdy.
2.The machine makes less noise.
3.The mould tool has precise measurement.
4.The chain is durable and can handle in any situations.
Prepared by,
Muhammad Hafiz Bin Muhammad Zamri
Muhammad Najibbuddin Bin Abu Zarni
Nor Fitriyah Bt Nor Wahee
^_^
Post a Comment