1. All hammers must put at proper place after use, said the mechanic. 2. They use pliers for maintenance the machine. 3. Ali use touch light at night during maintenance. 4. Faiz use cutter to cut the wire . 5. Nabil use scraper to scrap the wall. 6. Izwan use spanner to open the hard nut. 7. Ahmad use calliper to measure the thin of the cardboard. 8. They use screwdriver to screwing the screw very tight. 9. Ali buy adjustable wrenches brand Mealu although it expensive. 10. Ali use utility knife brand Dewalf to cut the hard cardboard. 11. Ali use a pincer to pull the hard nail from the cardboard. 12. The supervisor use a socket wench to open the hard bolt at the rooftop. 13. Faiz use wrenches size 18 to keep the bolt screwing proper and tight. 14. Ali use a box of clip to make the paper project stable in windy situation. 15. There are many type of size allen key that Raju use during maintenance the machine. prepare by : Muhammad Hamizan Muhammad Nabil Muhammad Faiz
1) Encik Mustapha use a hammer to knock the broken chair. 2) Ali cut the wire using a pliers. 3) Ahmad use chisel to scrub the damage paint. 4) Wire stripper is crucial instrument in wiring process. 5) The function of a caliper is to measure length and diameter of object. 6) Abu use the wrench to loose the bolt. 7) They just have a pincer in every production line. 8) Bakar use a ratchet to fastened the nuts. 9) The supervisor just went out to get a Panasonic torchlight. 10) Our company is using Wilda's cutter only. 11) A set of spanner is a tool needed most for each technician. 12) A set of hex key can be bought at any hardware suppliers. 13) A socket wrench set comes with a bundle of drive sockets. 14) Almost all mobile phone repair and service center has a precision screw driver set found on their working table. 15) Wire clippers only comes in a box at the store.
Common *Uzair tighten the screw properly. *Wan use a hammer to knock a nails . *Hazrul need a torch light go to the forest at night hiking. *Solar installer use a cutter to cut the wires. *Daniel has a clippers in a store anytime when he need it. *A wrench has been delivered to the technicians team. *Ali and Abu buy some cutting pliers at MR DIY *My father cropper the iron
Proper *En. Faizul has a Wilton pliers. *Bobo buy Stanley Jagger at mudah.com.
Countable *My father has 10 pieces Allen keys. *4 chisel has been used by solar installer. *The technician still tighten a machines using 2 ratchets.
Uncountable *A branch of wrench socket has been sold in lazada. *A factory workers packaging set of adjusting screw.
4 comments:
1. All hammers must put at proper place after use, said the mechanic.
2. They use pliers for maintenance the machine.
3. Ali use touch light at night during maintenance.
4. Faiz use cutter to cut the wire .
5. Nabil use scraper to scrap the wall.
6. Izwan use spanner to open the hard nut.
7. Ahmad use calliper to measure the thin of the cardboard.
8. They use screwdriver to screwing the screw very tight.
9. Ali buy adjustable wrenches brand Mealu although it expensive.
10. Ali use utility knife brand Dewalf to cut the hard cardboard.
11. Ali use a pincer to pull the hard nail from the cardboard.
12. The supervisor use a socket wench to open the hard bolt at the rooftop.
13. Faiz use wrenches size 18 to keep the bolt screwing proper and tight.
14. Ali use a box of clip to make the paper project stable in windy situation.
15. There are many type of size allen key that Raju use during maintenance the machine.
prepare by : Muhammad Hamizan
Muhammad Nabil
Muhammad Faiz
1) Encik Mustapha use a hammer to knock the broken chair.
2) Ali cut the wire using a pliers.
3) Ahmad use chisel to scrub the damage paint.
4) Wire stripper is crucial instrument in wiring process.
5) The function of a caliper is to measure length and diameter of object.
6) Abu use the wrench to loose the bolt.
7) They just have a pincer in every production line.
8) Bakar use a ratchet to fastened the nuts.
9) The supervisor just went out to get a Panasonic torchlight.
10) Our company is using Wilda's cutter only.
11) A set of spanner is a tool needed most for each technician.
12) A set of hex key can be bought at any hardware suppliers.
13) A socket wrench set comes with a bundle of drive sockets.
14) Almost all mobile phone repair and service center has a precision screw driver set found on their working table.
15) Wire clippers only comes in a box at the store.
Prepared by : Muhd Aiman Hafiz
Mohd Amizwan
1.My father keep a pliers in to the boxes
2.A mechanic always use 2 spanner to repair the parts of car.
3.All the 6 Allen key are different size.
4.En.Ahmad use a knife to cut a paper.
5.My father choose a MR.MARK brand as a new hammer.
6.When night came,Ali use a touch light to find way back home.
7.Ismail used a hammer and chisel to chip away at the wall.
8.The thief used a screwdrivers to break into the car.
9.The Wilton brand is a good brand caliper made in Germany.
10.I borrow the adjustable spanner from my friend.
11.Abuja tightens the screw properly.
12.Ahmad cut a wire by wire cutter.
13.Ali buy a box of clip wire at the shop.
14.I have many socket bold at the workshop.
15.I have one a tool box in my house garage.
Prepared by: 1)AQIFF
2)HAZIQ
3)RAJA ISMAIL
Common
*Uzair tighten the screw properly.
*Wan use a hammer to knock a nails .
*Hazrul need a torch light go to the forest at night hiking.
*Solar installer use a cutter to cut the wires.
*Daniel has a clippers in a store anytime when he need it.
*A wrench has been delivered to the technicians team.
*Ali and Abu buy some cutting pliers at MR DIY
*My father cropper the iron
Proper
*En. Faizul has a Wilton pliers.
*Bobo buy Stanley Jagger at mudah.com.
Countable
*My father has 10 pieces Allen keys.
*4 chisel has been used by solar installer.
*The technician still tighten a machines using 2 ratchets.
Uncountable
*A branch of wrench socket has been sold in lazada.
*A factory workers packaging set of adjusting screw.
prepared by
WAN HAZRUL
UZAIR
DANIEL
Post a Comment