I fix a broken CNC machine. I screw a missing nut at the CNC Machine. I check and tighten screw with carefully and properly. I put the screw driver beside me so its easy to find. I wear the goggles for my safety. Supervisor monitors and draws my attention. He sketches and supervises me correctly. We discuss and inspect the CNC Machine together. We think the machine is too old. We should buy a new one. I clean and throw the mess properly. We close and wrap our job today as a technician. We love our job.
I MIX THE LATEX SOLUTIONS I HIRE THE SECURITY FOR SAFETY PURPOSE I DESIGN THE LAYOUTOF OFFICE WALLPAPER I GREET THE MANAGER BEFORE STARTING THE JOB I ASSIST THE SENIOR ENGINEER TO FIX THE PROBLEM I MANAGE THE TIME, SO I AM PUNCTUAL I RESPOND TO COMPLIMENT OF CUSTOMER I SERVE THE COUNTRY AS A PROUD SUPERVISOR I CHECK THE MACHINES DAILY I ADAPT TO ENVIRONMENT I CUT THE OLD WIRES I CALCULATE THE COMPANY ANNUAL PROFIT I READ THE MACHINES MANUAL BEFORE USE THEM I COMPLETE THE TASK GIVEN IN SPECIFIC TIME I UPDATE THE PROGRESS STATUS DAILY OUTPUT I INSPECT THE PRODUCTION OUTPUT ACCOMPLISH INTENT I APPLY MY KNOWLEDGE AT RIGHT FIELD I PLAN MY WORK TASK WITH INTENT TO SUCCESS
THIS IS MY LIFE AS A FACTORY WORKER AFTER A FEW YEARS WORKING IN KOTAK FACTORY
PREPARED BY
AINOL ASHWAD BIN ABD JALIL MUHAMMAD HARITH BIN NORISHAM
I monitor and i check the machine, I sketch and i draw a pencil, I tighten and i screw a machine, I supervise and i discuss in the meeting room, I put and wrap the product, I wear safety helmet and i inspect the machine, I control and i repair a machine, I give the tool and i replace a nuts, I speak and i give the document.
Created : IDHAM BAIHAQI BIN NERMAN MUHAMMAD ZAKWAN AZAM SHAH BIN SHAHROM
Written by: *Muhammad Fathul Asyraff Bin Mohd Azman *Syed Muhammad Danial Hafifi Bin Syed Mansor
- I tighten up the screws - We need someone to supervise the construction project - I monitor the machine produce a product - I wear safety things before check the machine - I need to inspect all my workers - I wrap a rubbish and throw into a dustbin - I draw and sketch teh machine's plan - I run in the supermarket - We ride our bicycle around the village - I run quickly because the dog chase me - I give the tools to technician - I carry the box and put the box at the store
I screw, I tighten the loose golden nut, He checks,
I draw, I sketch the floor plan of new factory, He inspects,
I wear, I put on the great glowing in the dark helmet, He supervise.
It is the day,
Don't put, but pick up the expensive tools with forklift, Don't wrap, but cut the warm mold into half, Don't watch, but act towards the burning machine immediately.
It is the day,
We meet, he present how to tighten the golden nuts with expensive tools, we discuss, he monitors when to cut the mold in the new factory, We think, he teaches where to tie the messy cables.
It is the day,
I am not him, But, We fix, we pass, we go all the obstacles that coming TOGETHER...
Prepared by :
MOHD ZULFAKRI BIN JOLKEPPLI MUHAMAD SHAFIK SHAHIDAN BIN FAUZI
Everyday, I have to check the machines, I have to wear a safety buts, I have to make sure the screws at the machines are tighten, I inspect the machines very well, I supervise all my work.
At the classroom, I draw and sketch the product's plan, And I discuss it with my monitor.
I am successful to finish my product's plan, I put and wrap it on the monitor's table.
I monitor and I try to tighten the rules. I change before I put I skecth before I draw I check I wrap a thing I discuss with supervisor and I mix with idea I fix the screw caefully Before present I watch the trainer video I close I pick up
prepared by:-
Mohamed Afiq Fikri bin Mohamed Mustakim Muhammad Amir bun Mohd Adli
I cannot tighten the screw I check and inspect attendance I put and i wrap the box I wear watch to look time I supervise and i discuss to divide the work We train a new workers We volunteer to work outside I monitor and i check the machine I sketch and draw the paper I check the document I mix a old and new model for new product
I supervise a workers schedule. I monitor a workers duty. I inspect all task has done. I discuss with workers if any problem. We must clean the tools. We should to checks machine daily. I tighten the bolt the come loose. I put safety boot in locker. I sketch with a messy. I draw the project plan. I wrap for to protection. We change loose screw with new one. We wear hand glove for hygiene. But we keep safety is first! And lastly, I will do it better than..
Created by, MAHATHIR BIN YUSOF LUTFI NAJMI BIN MOHD ZAIN
11 comments:
Title : Work as Technician
I fix a broken CNC machine.
I screw a missing nut at the CNC Machine.
I check and tighten screw with carefully and properly.
I put the screw driver beside me so its easy to find.
I wear the goggles for my safety.
Supervisor monitors and draws my attention.
He sketches and supervises me correctly.
We discuss and inspect the CNC Machine together.
We think the machine is too old.
We should buy a new one.
I clean and throw the mess properly.
We close and wrap our job today as a technician.
We love our job.
Prepared by
1) Nur Aaina Atiqah Bt Mohamad Zahid
2) Fhaqrul Shazrie B Saedon
Title : Remember When
Written by: Siti Noorbayah Bt Abdullah
Remember when...
Everyday I check and inspect the machines
I need to monitor all the staff at my place
I make sure I screw and tighten using my wrench
Later on, I sketch and draw my plans
I supervise my staff and discuss with them
Why we have safety equipment and what we should wear
Drawings are done and wrapped in their bags
So tomorrow I'll put on manager's desk
He won't throw, I hope my sketches to the floor
Because I know if it happens, I need to redraw
I want to go home and get a sleep today
I'm too tired and I can't wait
Hey everyone, let's rest the case
Or you want me to continue and won the race
AS A FACTORY WORKER
I MIX THE LATEX SOLUTIONS
I HIRE THE SECURITY FOR SAFETY PURPOSE
I DESIGN THE LAYOUTOF OFFICE WALLPAPER
I GREET THE MANAGER BEFORE STARTING THE JOB
I ASSIST THE SENIOR ENGINEER TO FIX THE PROBLEM
I MANAGE THE TIME, SO I AM PUNCTUAL
I RESPOND TO COMPLIMENT OF CUSTOMER
I SERVE THE COUNTRY AS A PROUD SUPERVISOR
I CHECK THE MACHINES DAILY
I ADAPT TO ENVIRONMENT
I CUT THE OLD WIRES
I CALCULATE THE COMPANY ANNUAL PROFIT
I READ THE MACHINES MANUAL BEFORE USE THEM
I COMPLETE THE TASK GIVEN IN SPECIFIC TIME
I UPDATE THE PROGRESS STATUS DAILY OUTPUT
I INSPECT THE PRODUCTION OUTPUT ACCOMPLISH INTENT
I APPLY MY KNOWLEDGE AT RIGHT FIELD
I PLAN MY WORK TASK WITH INTENT TO SUCCESS
THIS IS MY LIFE AS A FACTORY WORKER AFTER A FEW YEARS WORKING IN KOTAK FACTORY
PREPARED BY
AINOL ASHWAD BIN ABD JALIL
MUHAMMAD HARITH BIN NORISHAM
Title :
Life as Production Designers.
I sketch image.
I draw prototype in the computer.
Product Design Leader monitors our team.
We discuss the project.
Product Designers wear safety gears.
They spuervise the prototype.
General workers screw the parts.
We tighten the parts in place.
Production Manager checks the worker shift.
They put it on the table.
Product Design Leader inspects the prototype.
Our team mixes the colour.
We watch the prototype's outer skin full of colours.
We hook it on the wall.
We wrap our drawing plan.
We clean our working room.
I switch off the computer.
Our Product Designer Team presents the project next month.
Prepared By:
MOHAMAD HISHAM BIN ABD RAZAK
ABDUL IKRAM BIN MAHIDI
Title : My work place
I monitor and i check the machine,
I sketch and i draw a pencil,
I tighten and i screw a machine,
I supervise and i discuss in the meeting room,
I put and wrap the product,
I wear safety helmet and i inspect the machine,
I control and i repair a machine,
I give the tool and i replace a nuts,
I speak and i give the document.
Created : IDHAM BAIHAQI BIN NERMAN
MUHAMMAD ZAKWAN AZAM SHAH BIN SHAHROM
Verbs Poem
Written by:
*Muhammad Fathul Asyraff Bin Mohd Azman
*Syed Muhammad Danial Hafifi Bin Syed Mansor
- I tighten up the screws
- We need someone to supervise the construction project
- I monitor the machine produce a product
- I wear safety things before check the machine
- I need to inspect all my workers
- I wrap a rubbish and throw into a dustbin
- I draw and sketch teh machine's plan
- I run in the supermarket
- We ride our bicycle around the village
- I run quickly because the dog chase me
- I give the tools to technician
- I carry the box and put the box at the store
Title : I Am Not Him
It is the day,
I screw, I tighten the loose golden nut,
He checks,
I draw, I sketch the floor plan of new factory,
He inspects,
I wear, I put on the great glowing in the dark helmet,
He supervise.
It is the day,
Don't put, but pick up the expensive tools with forklift,
Don't wrap, but cut the warm mold into half,
Don't watch, but act towards the burning machine immediately.
It is the day,
We meet, he present how to tighten the golden nuts with expensive tools,
we discuss, he monitors when to cut the mold in the new factory,
We think, he teaches where to tie the messy cables.
It is the day,
I am not him,
But,
We fix, we pass, we go all the obstacles that coming TOGETHER...
Prepared by :
MOHD ZULFAKRI BIN JOLKEPPLI
MUHAMAD SHAFIK SHAHIDAN BIN FAUZI
Title: Technician.
I am new in technician carrier.
Everyday,
I have to check the machines,
I have to wear a safety buts,
I have to make sure the screws at the machines are tighten,
I inspect the machines very well,
I supervise all my work.
At the classroom,
I draw and sketch the product's plan,
And I discuss it with my monitor.
I am successful to finish my product's plan,
I put and wrap it on the monitor's table.
Written by; ROSZAIHA BINTI DARMAN.
I monitor and I try to tighten the rules.
I change before I put
I skecth before I draw
I check I wrap a thing
I discuss with supervisor and I mix with idea
I fix the screw caefully
Before present I watch the trainer video
I close I pick up
prepared by:-
Mohamed Afiq Fikri bin Mohamed Mustakim
Muhammad Amir bun Mohd Adli
Workplace
I cannot tighten the screw
I check and inspect attendance
I put and i wrap the box
I wear watch to look time
I supervise and i discuss to divide the work
We train a new workers
We volunteer to work outside
I monitor and i check the machine
I sketch and draw the paper
I check the document
I mix a old and new model for new product
Prepared by :
FARID NURHAFIZ BIN HADZRI
JUNAIDI BIN ALSIDU
Tittle:All Of Duty
I supervise a workers schedule.
I monitor a workers duty.
I inspect all task has done.
I discuss with workers if any problem.
We must clean the tools.
We should to checks machine daily.
I tighten the bolt the come loose.
I put safety boot in locker.
I sketch with a messy.
I draw the project plan.
I wrap for to protection.
We change loose screw with new one.
We wear hand glove for hygiene.
But we keep safety is first!
And lastly,
I will do it better than..
Created by,
MAHATHIR BIN YUSOF
LUTFI NAJMI BIN MOHD ZAIN
Post a Comment