TOOLSWrench : 1. Please lend me the adjustable wrench. 2. Please use the No.8 wrench to tighten that nut.Screwdriver : 1. Please bring the Philip screwdriver. 2. Pass to me the short screwdriver.Pliers : 1. Do you have the long nose pliers? 2. The red pliers is mine.Multimeter : 1. You may use the digital multimeter for an accurate readings. 2. Replace batteries for that analog multimeter.Hammer : 1. Use the claw hammer to pluck the nails. 2. Please lend me your Warrington hammer forawhile.Prepared by : Kuganesh / Deneshwaran :)
1. Test Pen - Please pass me the red testpen. - I need the red testpen to check life wire.2. Screw Driver - Please help me bring the yellow screwdriver. - I want the yellow screwdriver to tighten screw.3. Multimeter. - Please bring the blue multimeter. - I want analog multimeter.4. Cutter. - Please take to me a big cutter. - I need to buy a big cutter.5. Plier. - Please pass me the silver plier. - I want the strong plier.Prepared by : Fais & Shafiq
Tool for Maintenance1) Spanner- please bring me the big spanner.- I want to buy one set of adjustable spanner.2) Screwdriver- I am using Philips Screwdriver to tighten the screw.- I need a Flat Head Screwdriver.3) Test Pen- I use my yellow test pen to check current flow.- my yellow test pen is gone missing.4) Multi meter- I use digital multi meter to check electronic component.- the analogue multi meter is used by technicians.5) Pliers- I use the cutter pliers to cut the wire.- The locking pliers is to use to replace a knob.6) Wrench- I use the torque wrench to tighten the bolt.- I use the socket wrench on a bigger bolt.Prepare by;Kamal, Naim & Saiful
1. Pliers - I use flt top pliers - The blue pliers is mine2. Multimeter - Faez use multimeter to check voltage on the electronic circuit - I have two type of multimeter3. Crimping Tool - I use crimping tool when i do the wiring process -Please be careful when using the crimping tool4. Test pen - I use the test pen to check the voltage - Do not use test pen to tighten screw5. Saw - I need to buy big saw - Please be careful when you using the saw6. Hammer - Please pass me the small hammer - After using the hammer put it back to the rack Prepared by : fahmie & shafie
Post a Comment
4 comments:
TOOLS
Wrench : 1. Please lend me the adjustable wrench.
2. Please use the No.8 wrench to tighten that nut.
Screwdriver : 1. Please bring the Philip screwdriver.
2. Pass to me the short screwdriver.
Pliers : 1. Do you have the long nose pliers?
2. The red pliers is mine.
Multimeter : 1. You may use the digital multimeter for an accurate readings.
2. Replace batteries for that analog multimeter.
Hammer : 1. Use the claw hammer to pluck the nails.
2. Please lend me your Warrington hammer forawhile.
Prepared by : Kuganesh / Deneshwaran :)
1. Test Pen
- Please pass me the red testpen.
- I need the red testpen to check life wire.
2. Screw Driver
- Please help me bring the yellow screwdriver.
- I want the yellow screwdriver to tighten screw.
3. Multimeter.
- Please bring the blue multimeter.
- I want analog multimeter.
4. Cutter.
- Please take to me a big cutter.
- I need to buy a big cutter.
5. Plier.
- Please pass me the silver plier.
- I want the strong plier.
Prepared by : Fais & Shafiq
Tool for Maintenance
1) Spanner
- please bring me the big spanner.
- I want to buy one set of adjustable spanner.
2) Screwdriver
- I am using Philips Screwdriver to tighten the screw.
- I need a Flat Head Screwdriver.
3) Test Pen
- I use my yellow test pen to check current flow.
- my yellow test pen is gone missing.
4) Multi meter
- I use digital multi meter to check electronic component.
- the analogue multi meter is used by technicians.
5) Pliers
- I use the cutter pliers to cut the wire.
- The locking pliers is to use to replace a knob.
6) Wrench
- I use the torque wrench to tighten the bolt.
- I use the socket wrench on a bigger bolt.
Prepare by;
Kamal, Naim & Saiful
1. Pliers
- I use flt top pliers
- The blue pliers is mine
2. Multimeter
- Faez use multimeter to check voltage on the electronic circuit
- I have two type of multimeter
3. Crimping Tool
- I use crimping tool when i do the wiring process
-Please be careful when using the crimping tool
4. Test pen
- I use the test pen to check the voltage
- Do not use test pen to tighten screw
5. Saw
- I need to buy big saw
- Please be careful when you using the saw
6. Hammer
- Please pass me the small hammer
- After using the hammer put it back to the rack
Prepared by : fahmie & shafie
Post a Comment