Tittle: Safety Measures 1. Wear the eye protection 2. Wear the safety helmet 3. Check the earplug 4. Wear the safety boot 5. Wear the respiratory equipment 6. Wear the safety gloves 7. Wear the safety overall 8. Use the face protection 9. Wear the safety harness 10.Don't run in the production line
1-Make sure hard hat in good condition 2-Wear your jacket 3-Bring ear plugs 4-Put gloves 5-Use safety boots 6-Check a test pen 7-Don't wear rings 8-Write a report if any problem 9-Don't smoke 10-Wear goggles
1) Please wear safety jacket and safety boots before entering the workshop. 2) Please jot down your name in the workshop log book. 3) Wear the right safety equipment following the right machine work. 4) Please read the S.O.P before you use the machine. 5) Check the condition of the machine. 6) Report to the supervisor if any problem acquired. 7) Push the emergency button if short circuit happen. 8) Clean the area of the machine following 5S after using it. 9) Please put back the PPE Equipment after usage. 10) Switch off the machine after using it.
1. Wear your safety boots all the time. 2. Wear your goggles safely. 3. Wear hard hat when entering site. 4. Use the forklift to remove the heavy item. 5. Don't use the testpen to tighten a screw. 6. Keep your tools in your toolbags. 7. Don't play at site. 8. Don't consume drugs or alcohol during work. 9. Report to your supervisior for any incidents. 10. Please guide the junior workers.
4 comments:
Tittle: Safety Measures
1. Wear the eye protection
2. Wear the safety helmet
3. Check the earplug
4. Wear the safety boot
5. Wear the respiratory equipment
6. Wear the safety gloves
7. Wear the safety overall
8. Use the face protection
9. Wear the safety harness
10.Don't run in the production line
Prepared by : Fahmie & Syafie
Title : workplace Instruction
1-Make sure hard hat in good condition
2-Wear your jacket
3-Bring ear plugs
4-Put gloves
5-Use safety boots
6-Check a test pen
7-Don't wear rings
8-Write a report if any problem
9-Don't smoke
10-Wear goggles
Prepared by:
Faes and Shafiq
Title : Before entering workshop
1) Please wear safety jacket and safety boots before entering the workshop.
2) Please jot down your name in the workshop log book.
3) Wear the right safety equipment following the right machine work.
4) Please read the S.O.P before you use the machine.
5) Check the condition of the machine.
6) Report to the supervisor if any problem acquired.
7) Push the emergency button if short circuit happen.
8) Clean the area of the machine following 5S after using it.
9) Please put back the PPE Equipment after usage.
10) Switch off the machine after using it.
Prepare by: Kamal & Saiful
Title : Instructing the Bangladesh workers.\
1. Wear your safety boots all the time.
2. Wear your goggles safely.
3. Wear hard hat when entering site.
4. Use the forklift to remove the heavy item.
5. Don't use the testpen to tighten a screw.
6. Keep your tools in your toolbags.
7. Don't play at site.
8. Don't consume drugs or alcohol during work.
9. Report to your supervisior for any incidents.
10. Please guide the junior workers.
Prepared by :
M. Fakhrul Naim / Kuganesh
Post a Comment