1. Arif needs wire cutter for this task. 2. The most used brand for wire cutter is the Clauss. 3. My father used a torchlight to the area. 4. That mechanic buy a box of nuts. 5. We used adjustable spanner to tighten the screw. 6. Online shopping for socket wrenches from a great selection at Tools & Home Improvement Store. 7. Snap On is the most used among the mechanic. 8. 2 Phillips Screwdriver is needed to complete the task. 9. I have a collection of screwdriver. 10. He needs 4 nuts.
Prepared by MUHAMMAD NUR IMAN BIN ABDUL HALIM & MOHD KAMARUL ARIFIN BIN MOHD YIM
1)Stone Cold buy a combination plier at Mr Diy store 2)Iman use wire cutter to cut wire when he doing his wiring. 3)Liyana is visiting some of her rising target torch factory.
2 proper:
1)Stanley Spanner is made in France. 2)The most expensive hammer in the world is Estwing Hammer.
3 countable:
1)Normally at the production line,we will use a philip screwdriver. 2)Rosmah keep her ratchet wrench at her toolbox. 3)A spirit level is the most common things should have at construction area.
2 uncountable:
1)Nik is buying a box of nails because he want to build his tree-house. 2)Joyah use 1 dozen of bold nuts to repair the machine in production.
Prepared by Nur Liyana binti Roslan & Nik Solehuddin bin Nik Sabri
1-Syahrul are thighten the nuts with ratchet wrench. = Common 2-Syafiq has 3 bolts and nuts. = Countable 3-The technician was tighten a screw with srewdriver slotted. = Common 4-Cambells has use stanley adjustable wrench for technician tools. = Proper 5-Nick has using "WIHA" screwdriver philips for open the screw. = Proper 6-Mat was check flat surface by using level bar tools. = Common 7-Ganu tapped 4 nails behind the door by using thor hammer. = Countable 8-The supervisor cut off 5 of the wire that came out from the machine by using the wire cutter tools. = Countable 9-Their have many of the pliers in store room at Cambells. = Uncountable 10-Cambells has provide a lot of torchlight for their technician. = Uncountable
1.En.Along tightens the screw properly. 2.Everyone in Campbells has using a ratchet gear wrench. 3.Some of people at Campbells has using a adjustable spanar 4.Each worker is given a Titan flashlight for use during an emergency case. 5.Only 2 hammer should be used during working hours. 6.Mr.Raju checks the Stanley ratchet once a week. 7.Ali tightens the 4 nut properly. 8.There are two type of hammer in the Production Line. 9.A box of plies to the staff has been delivered to the packaging section. 10.En.Samad helped to carry the box of bolts.
Prepared by: Shahizwan Bin Abdul Latif Muhammad Izwan Hazman Bin Mohd Rafta Sponsored by: Selangor Human Resources Development Centre
5 comments:
1. Arif needs wire cutter for this task.
2. The most used brand for wire cutter is the Clauss.
3. My father used a torchlight to the area.
4. That mechanic buy a box of nuts.
5. We used adjustable spanner to tighten the screw.
6. Online shopping for socket wrenches from a great selection at Tools & Home Improvement
Store.
7. Snap On is the most used among the mechanic.
8. 2 Phillips Screwdriver is needed to complete the task.
9. I have a collection of screwdriver.
10. He needs 4 nuts.
Prepared by MUHAMMAD NUR IMAN BIN ABDUL HALIM & MOHD KAMARUL ARIFIN BIN MOHD YIM
The sentences ( exercise )
3 common:
1)Stone Cold buy a combination plier at Mr Diy store
2)Iman use wire cutter to cut wire when he doing his wiring.
3)Liyana is visiting some of her rising target torch factory.
2 proper:
1)Stanley Spanner is made in France.
2)The most expensive hammer in the world is Estwing Hammer.
3 countable:
1)Normally at the production line,we will use a philip screwdriver.
2)Rosmah keep her ratchet wrench at her toolbox.
3)A spirit level is the most common things should have at construction area.
2 uncountable:
1)Nik is buying a box of nails because he want to build his tree-house.
2)Joyah use 1 dozen of bold nuts to repair the machine in production.
Prepared by Nur Liyana binti Roslan & Nik Solehuddin bin Nik Sabri
a)Common
1. Mr.Sufi checks the torchlight every night.
2. Mr.Izzuddin helped to carry the hammer.
3. Manager need screwdriver.
b)Proper
1. We use the KAPPO water level
2. Forge steel ratchet is very good
c)Countable
1. Mr.Syafiq give Sharul four pliers.
2. The boy is carring a adjustable spanner.
3. A diogonal pliers must have every garage
d)Uncountable
1. En syahrul buying one packet screwnuts
2. Sufi has one slotted screwdriver box in the house
prepared by :Muhammad Sufi bin Mazlan & Muhammad Izzuddin bin Zakaria
1-Syahrul are thighten the nuts with ratchet wrench. = Common
2-Syafiq has 3 bolts and nuts. = Countable
3-The technician was tighten a screw with srewdriver slotted. = Common
4-Cambells has use stanley adjustable wrench for technician tools. = Proper
5-Nick has using "WIHA" screwdriver philips for open the screw. = Proper
6-Mat was check flat surface by using level bar tools. = Common
7-Ganu tapped 4 nails behind the door by using thor hammer. = Countable
8-The supervisor cut off 5 of the wire that came out from the machine by using the wire cutter tools. = Countable
9-Their have many of the pliers in store room at Cambells. = Uncountable
10-Cambells has provide a lot of torchlight for their technician. = Uncountable
*Common :3
*Proper :2
*Countable :3
*Uncountable:2
Prepared by: # Muhamad Syafiq Bin Kassim
# Muhammad Syahrul Azri Bin Abdad
*YES-MT08*
1.En.Along tightens the screw properly.
2.Everyone in Campbells has using a ratchet gear wrench.
3.Some of people at Campbells has using a adjustable spanar
4.Each worker is given a Titan flashlight for use during an emergency case.
5.Only 2 hammer should be used during working hours.
6.Mr.Raju checks the Stanley ratchet once a week.
7.Ali tightens the 4 nut properly.
8.There are two type of hammer in the Production Line.
9.A box of plies to the staff has been delivered to the packaging section.
10.En.Samad helped to carry the box of bolts.
Prepared by: Shahizwan Bin Abdul Latif
Muhammad Izwan Hazman Bin Mohd Rafta
Sponsored by: Selangor Human Resources Development Centre
Date : 24.11.2017
Post a Comment